- 136 -
6.6 Wireless
Figure 6-6 Wireless menu
There are five submenus under the Wireless menu (shown in Figure 6-6): Wireless Settings,
Wireless Security, MAC Filtering, Wireless Advanced and Wireless Statistics. Click it, and
you will be able to configure the corresponding function.
6.6.1 Wireless Settings
Choose menu “Wireless
Wireless Settings”, and then you can configure the basic settings
for the wireless network on this page.
Figure 6-7 Wireless Settings - Repeater
Wireless Name of Root AP - The SSID of AP that you want to access.
MAC Address of Root AP - The MAC address of AP that you want to access.
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
Mode - Select the desired mode. The default setting is 11bgn mixed.
To Next Page
Loading...
