300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
- 157 -
6.9.3 Factory Defaults
Choose menu “System Tools
Factory Defaults”, and you can restore the configurations of
the Router to factory defaults on the following screen.
Figure 6-34 Restore Factory Default
Click the Restore button to reset all configuration settings to their default values.
The default User Name: admin
The default Password: admin
The default IP Address: 192.168.0.254
The default Subnet Mask: 255.255.255.0
Note:
All changed settings will be lost when defaults are restored.
6.9.4 Backup & Restore
Choose menu “System Tools
Backup & Restore”, and then you can save the current
configuration of the Router as a backup file and restore the configuration via a backup file as
shown in Figure 6-35.
Figure 6-35 Backup & Restore Configuration
Click the Backup button to save all configuration settings as a backup file in your local
computer.
To upgrade the Router's configuration, follow these instructions.
• Click the Browse… button to locate the update file for the Router, or enter the exact path
to the Setting file in the text box.
• Click the Restore button.
To Next Page
Loading...
