- 202 -
Key type - Choose according to the AP's security configuration. It is recommended that the
security type is the same as your AP's security type
WEP Index - Choose if the key type is WEP (ASCII) or WEP (HEX).It indicates the index of
the WEP key.
Auth Type - Choose if the key type is WEP (ASCII) or WEP (HEX).It indicates the
authorization type of the Root AP.
Password - Fill the password in this blank if the AP your Router is going to connect needs
password.
Local SSID - Enter a value of up to 32 characters. The same Name (SSID) must be assigned
to all wireless devices in your network.
Enable Wireless Router Radio - The wireless radio of the Router can be enabled or
disabled to allow wireless stations access. If enabled, the wireless stations will be able to
access the Router. Otherwise, wireless stations will not be able to access the Router.
Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the wireless
router will broadcast its name (SSID) on the air.
Disable Local Wireless Access - If you select the Disable Local Wireless Access checkbox,
the wireless router will disable local wireless access, other stations will not be able to access
the Router by wireless.
To Next Page
Loading...
