- 57 -
Figure 4-37 Media Server Setting
Server Name - The name of this Media Server.
Server Status - Indicates the Media Server’s current status, started or stopped. You can
click the Start button to start the Media Server and click the Stop button to stop it.
Name - The display name of this folder.
File System - The file system type on the partition can be FAT32 or NTFS.
Folder - The real full path of the specified folder.
Delete - You can delete the share folder by click Delete.
To set up your media server, please follow the instructions below:
1. Plug an external USB hard disk drive or USB flash drive into this router.
2. Click the Start button to start the media server.
3. Click the Add share folder button to specify a folder as the search path of media server. The
screen will then appear as shown in Figure 4-38.
Figure 4-38 Add New Folder
Display Name - You can enter a display name for the share folder.
Share entire partition - Choose this option and then the folders contained in this
partition will all be shared.
To Next Page
Loading...
