23
USB STICKS
The TML A unit allows the functionality to both import and export jobs to and from a USB stick.
This allows you to work remotely where cellular coverage isn’t available and isn’t able to send or
receive jobs or maps.
For this feature to be available, you will need a USB Dongle plugged into the back of your TML-A.
When you plug a new USB stick in for the rst time, there are 2 popups that come up asking
for permission. Tap the ‘always’ option before allowing, otherwise the USB stick may not work
properly and the popups will appear every time you plug it in.
Note: Only USB sticks formatted as Fat32 are supported. Map and job les will only work if they
are in the root directory of the USB stick – it will not work if they are in folders.
USB Dongle USB Dongle Plug
Make sure your USB stick is plugged in
Importing a Map / Job via USB
1. Tap New at the top right side of the
window
2. Enter Job Details and tap Add a
Block or Map at the bottom of the
window
To Next Page
Loading...
General