33
Your TML-A has the functionality of placing 4 different types of named markers. By default they
are named General A-D. You can edit these markers types to have different names depending
on your requirements, or you can name each marker separately when you place them.
These markers are only available to be placed while you are in a job. While out of a job, you will
only have the option of placing Hazards, Wires, and Aireld Markers.
Adding Markers to a Current Job
Renaming and Removing a Marker
1. Open the job you wish to add
markers to
2. With the Job active, Tap
Markers and select the
marker you wish to use.
3. With the Add a Marker
window open, you have
two options to place a
marker.
a) Tap Place a Marker
to place in your current
location
b) Tap anywhere on the
map to place the marker
where you have tapped
1. While on the main map screen, tap on the marker you
wish to edit/remove
2. The Edit Marker window should appear
3. Tap on the name of the marker to edit the name. Tap
Done when nished.
4. Tap Delete to delete the marker.
To Next Page
Loading...
General