7
Switching Proles
Creating a Preset
Renaming a Prole
1. Tap on the prole icon
1. Tap the three dots
1. Tap on the prole icon
Make sure you’re logged
into your prole before
renaming
2. Click on “Switch Prole”
2. Click on “Duplicate
Preset”
3. Once you have created
your duplicate Preset, set
up as required.
Create a new prole for
each pilot – each pilot can
have as many presets as
required
Tip: You can customise
colours in this menu too
2. Click on “Rename
Prole”
Type the new prole name
then click “Done”
3. Select the prole you wish to switch to