BlueTOAD Spectra RSU Deployment
TrafficCast Quick Start—BlueTOAD Spectra and Spectra RSU
Revision 02 May 2019 3-19
iii. Pass the cable through the Liquid-Tight Cable Gland of the Ethernet cable Coupler and
terminate it to an RJ45 connector per the pinout shown.
Note: You will have to remove the Strain Relief on the cable to pass it through the
Cable Gland. However, you can slide the Strain Relief away from the RJ-45
connector without cutting the Strain Relief.
To Next Page
Loading...