Ch = Check, C = Clean, M = Maintenance
Fan bearings with lubricat-
ing nipples
according to Table 8 (Lubrication intervals
for fan bearings)
Motor bearings with lubri-
cating nipples
according to Table 10 (Lubrication inter-
vals for motor bearings (in month))
first time after operation of 10 hours
if necessary / at least after 2 years
Check e-heater section for thermal damages after every mains supply
failure!
9.5.5 Spray tube humidifiers
Bleed off settings / valves
9.5.4 Honey comb humidifi-
ers
9.5.5 Spray tube humidifiers
Weather louver, grid and
hood
9.9.1 Plate heat exchangers
Data in tons of CO
2
-equivalent
Table 12: Maintenance plan