Trane IntelliPak I User Manual

April 2010
RT-SVP04F-EN
Programming
Troubleshooting
Guide
IntelliPak™ I and II
Commercial Single Zone Rooftop Air
Conditioner with Variable Air Volume (VAV)
Controls
Model Number
IntelliPak I models S*HF*20-75, S*HL*20-75, S*HG*90-130, S*HK*90-130 Ton
W*HB, W*HE
IntelliPak II models S*HJ090-162, W*HCA-C

Trane IntelliPak I Specifications

General

Refrigerant	R-410A
Cooling Capacity	20 to 130 tons
Compressor Type	Scroll
Voltage	208/230/460/575 V
Dimensions	Varies by model
Weight	Varies by model

Summary

General Information

Commonly Used Acronyms

Defines abbreviations and acronyms used throughout the manual.

Glossary of Terms

Provides definitions for technical terms used in the document.

UCM Control System

Explains the Unit Control Module system and its components.

Human Interface Module

Describes the unit's Human Interface module, its display, and keypad.

Unit Operation Keys

Details the function of each key on the Human Interface keypad.

Password Protected Screens

Outlines the screens requiring a password for access or modification.

System Operating Status

STATUS Menu

Explains how to navigate the STATUS menu to view operating conditions and component status.

System Programming Setup

SETUP Menu

Guides users through programming initial operating information and parameters.

System Programming SETPOINTS

SETPOINT Menu

Details how to set default zone temperatures, supply air, and pressure setpoints.

System Configuration

CONFIGURATION Menu

Covers configuration programming steps for unit setup after module replacement.

System Testing & Troubleshooting

SERVICE MODE Menu

Explains how to use the SERVICE MODE for unit operation testing.

DIAGNOSTICS Menu

Describes how to view and manage system diagnostics and failure logs.

Failure Modes

Details the two types of failure modes that can occur in the unit.

Communication Link Problems

Addresses issues related to communication link failures between modules.