Installation - Electrical
58 CLCH-SVX013B-EN
unit and motor connection diagrams are provided on the
VFD if Trane-provided, or refer to the motor nameplate.
Fractional horsepower motors may be factory connected
to a terminal
box on
the unit. If this construction is
provided, the installer should complete field wiring to this
connection box. For a typical high voltage wiring
schematic, see Figure 80.
Note: Pr
operly seal all penetrations in unit casing. Failure
to seal p
enetrations from inner panel to outer panel
could result in unconditioned air entering the unit.
To Next Page
Loading...
