Trane TR170 - Specifications; Mains Supply Specifications

6
Specications
6.1 Mains Supply
6.1.1 3x200–240 V AC
Frequency converter TR150
PK25 PK37 PK75 P1K5 P2K2 P3K7 P5K5 P7K5
Typical shaft output [kW] 0.25 0.37 0.75 1.5 2.2 3.7 5.5 7.5
Typical shaft output [hp] 0.33 0.5 1.0 2.0 3.0 5.0 7.5 10.0
Protection rating IP20 H1 H1 H1 H1 H2 H3 H4 H4
Maximum cable size in terminals (mains,
motor) [mm
2
(AWG)]
4
(10)
4
(10)
4
(10)
4
(10)
4
(10)
4
(10)
16
(6)
16
(6)
Output current
40
° C (104 ° F) ambient temperature
Continuous
(3x200–240 V) [A]
1.5 2.2 4.2 6.8 9.6 15.2 22.0 28.0
Intermittent
(3x200–240 V) [A]
1.7 2.4 4.6 7.5 10.6 16.7 24.2 30.8
Maximum input current
Continuous
3x200–240 V) [A]
1.1 1.6 2.8 5.6
8.6/
7.2
14.1/
12.0
21.0/
18.0
28.3/
24.0
Intermittent
(3x200–240 V) [A]
1.2 1.8 3.1 6.2
9.5/
7.9
15.5/
13.2
23.1/
19.8
31.1/
26.4
Maximum mains fuses See chapter 3.2.3 Fuses and Circuit Breakers.
Estimated power loss [W], Best case/typical
1)
12/
14
15/
18
21/
26
48/
60
80/
102
97/
120
182/
204
229/
268
Weight enclosure protection rating IP20 [kg
(lb)]
2.0 (4.4) 2.0 (4.4) 2.0 (4.4) 2.1 (4.6) 3.4 (7.5) 4.5 (9.9) 7.9 (17.4) 7.9 (17.4)
Eciency [%], best case/
typical
2)
97.0/
96.5
97.3/
96.8
98.0/
97.6
97.6/
97.0
97.1/
96.3
97.9/
97.4
97.3/
97.0
98.5/
97.1
Output current
50
° C (122 ° F) ambient temperature
Continuous
(3x200–240 V) [A]
1.5 1.9 3.5 6.8 9.6 13.0 19.8 23.0
Intermittent
(3x200–240 V) [A]
1.7 2.1 3.9 7.5 10.6 14.3 21.8 25.3
Table 6.1 3x200–240 V AC, 0.25–7.5 kW (0.33–10 hp)
1) Applies for dimensioning of frequency converter cooling. If the switching frequency is higher than the default setting, the power losses may
increase. Keypad and typical control card power consumptions are included.
2) Eciency measured at nominal current. For energy eciency class, see chapter 6.4.10 Ambient Conditions.
Specications
38
08/2020 All rights reserved.
BAS-SVX58D-EN
6
6