EasyManua.ls Logo

Trane TR170 - Digital Inputs; Analog Inputs; Analog Output

Trane TR170
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cross-section DC terminals for lter feedback on enclosure sizes H1–H3, I2, I3, I4 4 mm
2
/11 AWG
Cross-section DC terminals for lter feedback on enclosure sizes H4–H5 16 mm
2
/6 AWG
Maximum cross-section to control terminals, rigid wire 2.5 mm
2
/14 AWG
Maximum cross-section to control terminals, exible cable 2.5 mm
2
/14 AWG
Minimum cross-section to control terminals 0.05 mm
2
/30 AWG
1) See chapter 6.1.2 3x380–480 V AC for more information.
6.4.4 Digital Inputs
Programmable digital inputs 4
Terminal number 18, 19, 27, 29
Logic PNP or NPN
Voltage level 0–24 V DC
Voltage level, logic 0 PNP <5 V DC
Voltage level, logic 1 PNP >10 V DC
Voltage level, logic 0 NPN >19 V DC
Voltage level, logic 1 NPN <14 V DC
Maximum voltage on input 28 V DC
Input resistance, R
i
Approximately 4 kΩ
Digital input 29 as thermistor input Fault: >2.9 kΩ and no fault: <800 Ω
Digital input 29 as pulse input Maximum frequency 32 kHz push-pull-driven & 5 kHz (O.C.)
6.4.5 Analog Inputs
Number of analog inputs 2
Terminal number 53, 54
Terminal 53 mode Parameter 16-61 Terminal 53 Setting: 1 = voltage, 0 = current
Terminal 54 mode Parameter 16-63 Terminal 54 Setting: 1 = voltage, 0 = current
Voltage level 0–10 V
Input resistance, R
i
Approximately 10 kΩ
Maximum voltage 20 V
Current level 0/4–20 mA (scalable)
Input resistance, R
i
<500 Ω
Maximum current 29 mA
Resolution on analog input 10 bit
6.4.6 Analog Output
Number of programmable analog outputs 2
Terminal number 42, 45
1)
Current range at analog output 0/4–20 mA
Maximum load to common at analog output 500 Ω
Maximum voltage at analog output 17 V
Accuracy on analog output Maximum error: 0.4% of full scale
Resolution on analog output 10 bit
1) Terminals 42 and 45 can also be programmed as digital outputs.
Digital outputs
Number of digital outputs 4
Terminals 27 and 29
Terminal number 27, 29
1)
Voltage level at digital output 0–24 V
Maximum output current (sink and source) 40 mA
Terminals 42 and 45
Terminal number 42, 45
2)
Voltage level at digital output 17 V
Maximum output current at digital output 20 mA
Specications
TR150 and TR170 Quick Guide
BAS-SVX58D-EN
08/2020 All rights reserved.
45
6
6

Other manuals for Trane TR170

Related product manuals