9
4. Securely attach the HME adapter bottom to your
hose.
5. Securely attach the HME adapter top to your mask.
Navigating the Device Buttons
CONTROL PANEL
POWER BUTTON AND LED INDICATORS
Standby Mode
When the device is plugged in, it will be in Standby Mode.
• The LED glows green, indicating that the device has
power.
• Pressing the power button transitions the device to
Therapy Mode.
o All LEDs will turn off.
o The blower will start and the device will begin
regulating pressure.
b. Pressure ramp
c. Dry cycle
d. Power
To Next Page
Loading...
