Transcend Micro Quick Start Guide

6
Setting Up Your Transcend Micro
AIRFLEX™ HOSE CONNECTION
1. Connect the hose firmly to the air outlet by inserting
the hose coupler into the air outlet on the device.
2. Locate the arrow on the air hose coupler and arrow
on the device.
3. Align the arrows and gently insert and twist the air
hose coupler clockwise until connector is seated
securely into the device. The image below indicates
a fully secured hose with the hose arrow below the
parting line of the device
4. Connect your mask to the opposite end of the hose.
5. To remove the hose simply turn it counterclockwise
and pull gently away from the device.
a. Transcend Micro device
b. Air outlet
c. Air hose coupler
d. AirFlex hose

Transcend Micro Specifications

General

Brand	Transcend
Product	Micro
Pressure Range	4-20 cmH2O
Altitude Adjustment	Automatic
Operating Modes	CPAP