Transcend Micro Quick Start Guide

24
Breathing circuit has excessive
leaks
Check hose, mask and any
accessories in the breathing circuit
for air leaks and proper fit.
User not breathing deeply enough
to trigger SleepStart
Ensure deep breath is taken with
mask securely fitted or press Power
button to start therapy.
If the problem persists, call your
homecare provider’s technical
service department.
Bluetooth LED is red (not flashing)
all other LEDs are off. Device does
not respond to button presses
Disconnect power, wait at least 15
seconds, re-connect power.
If the problem persists, call your
homecare provider’s technical
service department
Precautions for Use
This section describes the warnings and cautions associated
with use of the Transcend Micro. The following guidelines
apply to this document:
Warning Indicates the possibility of serious injury
or death to yourself or others.
Caution! Indicates the possibility of minor injury or
damage to the equipment.
NOTE: Indicates a tip, explanation, or feature to
aid in understanding, or efficient
operation of the device.

Transcend Micro Specifications

General

Brand	Transcend
Product	Micro
Pressure Range	4-20 cmH2O
Altitude Adjustment	Automatic
Operating Modes	CPAP