Transcend Micro Quick Start Guide

11
RAMP BUTTON AND LED INDICATORS
Standby Mode
• The LED glows blue if the Ramp is configured and
auto-ramp is enabled.
o The LED is off if Ramp is not configured, or
Auto Ramp is disabled.
• Pressing the button when Ramp is not configured has
no effect.
o See Transcend desktop software user guide to
configure https://mytranscend.com/customer-
care/user-guides/
• Pressing the button when Ramp is configured toggles
Auto Ramp between enabled and disabled.
Therapy Mode
• The LED is off.
• If Ramp is active, pressing and holding the button
accelerates Ramp increase.
• If Ramp is configured but not active, pressing the
button starts Ramp.
• If Ramp is not configured, pressing the button has no
effect.
DRY CYCLE BUTTON AND LED INDICATORS
Standby Mode
• The LED is off when Drying Mode is off.
• The LED glows blue when Dry Cycle is on.

Transcend Micro Specifications

General

Brand	Transcend
Product	Micro
Pressure Range	4-20 cmH2O
Altitude Adjustment	Automatic
Operating Modes	CPAP