Transcend Micro Quick Start Guide

13
CONNECTING YOUR DEVICE
• Ensure Bluetooth is enabled on the Transcend Micro
device.
• On the MySleepDash app, tap continue on the
welcome page.
• Open the QR scanner on your phone. You may be
required to allow the device to use the camera
features.
• Locate the QR code on the bottom of the Transcend
Micro device and scan using your smart device.
• Click add to complete adding your device.
• The blue light on the Transcend Micro will turn green.
• Your device is now connected.
Starting Therapy
1. Connect the Transcend Micro to a power source and
allow it to enter Standby Mode.
2. Be sure your mask fits firmly and in place before
starting therapy.
3. Press the Power button or breathe normally to engage
SleepStart, our auto start feature. Therapy will begin
when the blower delivers or ramps to the prescribed
therapy pressure.
NOTE: Some masks are configured differently. Due
to this variability SleepStart may not function.
NOTE: If therapy is interrupted by a power failure, the
device will automatically restart therapy once
power is restored.

Transcend Micro Specifications

General

Brand	Transcend
Product	Micro
Pressure Range	4-20 cmH2O
Altitude Adjustment	Automatic
Operating Modes	CPAP