Transcend Micro Quick Start Guide

18
Disconnecting Comfort Features
WHISPERSOFT MUFFLER ASSEMBLY
1. Remove the short air hose from the device, by twisting
the connector left or counterclockwise and pulling the
hose away from the device. Disconnect the other end
of the short air hose from the muffler.
2. Remove the muffler from one end of your long hose
and your mask from the other end of the hose.
3. After following the cleaning process, refer to steps in
the Connecting Comfort Feature section to
reassemble the muffler.
Cleaning of Accessories
The following accessories should be cleaned with a 5%
solution of mild dishwashing liquid, detergent in distilled
water (1.6 fl. oz. liquid cleaning detergent per quart of
distilled water). Mild detergent should contain biodegradable
anionic surfactants and no phosphate.
Clean the device and its components as shown in the
schedules below to maintain the quality of your device and
to help prevent the growth of germs that can adversely
impact your health.
a. Short air hose
b. WhisperSoft
muffler
c. Long air hose

Transcend Micro Specifications

General

Brand	Transcend
Product	Micro
Pressure Range	4-20 cmH2O
Altitude Adjustment	Automatic
Operating Modes	CPAP