Optional Equipment (for qualified installers only) 47
© Travis Industries 4140808 100-01298
LP Conversion Instructions
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the
manufacturer’s instructions and all applicable codes and requirements of the authority
having jurisdiction. If the information in these instructions is not followed exactly, a fire,
explosion or production of carbon monoxide may result causing property damage, personal
injury or loss of life. The qualified service agency is responsible for the proper installation
of this kit. The installation is not proper and complete until the operation of the converted
appliance is checked as specified in the manufacturer’s instructions supplied with the kit.
Packing List
Convert the appliance prior to installing the gas line to ensure proper gas use.
1. Access the firebox.
2. Remove the burners (see “Remove the Burner,” in the owners manual).
3. When using LP, remove and discard the two existing orifice gaskets (see below).
(2) LP Seal Plates
LP
Orifices
To Next Page