23
4. Electrical specifications
4.1 Light configurations
The lighting equipment on the bicycles depends on region and maximum allowed speed of the bicycles.
EU-Type Approval bicycles have lighting that comply with EU-laws.
The wire harnesses differ in detail.
4.1.1 Lights on EU 25 km/h models
Front light: Supernova E3 Mini2 (12V)
Rear light: Supernova E3 Taillight (12V)
Power source: The front light connects to the 12V front light port on the Bosch drive unit and the rear light connects
to the rear light port on the Bosch drive unit, with use of Bosch light connectors and cables.
Specifics: No brake light, no brake switches and no high beam.
Refer to paragraph
4.2.1 for the electric diagram.
4.1.2 Lights on US 28 mph models
Front light: Supernova M99 Pure+ (12V)
Rear light: Supernova E3 Taillight (12V)
Power source: The front light connects to the 12V front light port on the Bosch drive unit and the rear light
connects to the rear light port on the Bosch drive unit, with use of Bosch light connectors
and cables.
Specifics: No brake light, no brake switches and no high beam.
Refer to paragraph
4.2.1 for the electric diagram.
4.1.3 Lights on 45 km/h models with EU-Type Approval
Front light: Supernova M99 Pro (12V)
Rear light: Supernova M99 Taillight (12V)
Power source: Both lights run from the Bosch battery connection (by use of a Bosch “eshift” Y-cable).
Specifics: Equipped with brake light, brake switches and high beam.
Refer to paragraph 4.2.2 for the electric diagram.