TREND MT/JIG - Accessories

ACCESSORIES
Suitable router cutters
Although standard router cutters can be used having the appropriate diameter, a set of
five long reach straight cutters with
1
⁄ 4 " or 8mm shanks are available. Spiral bits can be
used for an improved finish.
Ref. SET/MT1X1/4TC or Metric Euro jig requires cutter set
SET/MT1X8MMTC Ref. SET/MT2X8MMTC.
These cutters are also available separately.
Optional Extraction Dust Kit
For dust-free working, this kit allows connection to a 39mm or 58mm hose. The dust
shield is only used when routing 90° tenons.
Ref. MT/DUSTKIT
Metal Guide Bushes
These can be purchased to replace the plastic versions supplied with the jig or for
alternative sizes of tenons.
MT/JIG
-6-
D
x4
x4
x4
x2
Dia. Ref. Set Ref.
6.3mm (
1
⁄4”) C008
7.9mm (
5
⁄16”) C012
9.5mm (
3
⁄8”) C015 SET/MT1
12.7mm (
1
⁄2”) C022
15.8mm (
5
⁄8”) C026
Other cutters for alternative Tenon
4.8mm (
3
⁄16”) C003
11.1mm (
7
⁄16”) C018A
14.3mm (
9
⁄16”) C024
Dia. Ref. Set Ref.
6mm C005A
8mm C012A
10mm C016B SET/MT2
12mm C171
16mm C025B
Other cutters for alternative Tenon
14mm C023B
IMPERIAL JIG
Dia. Ref.
15.9mm (
5
⁄8”) GB159
22.2mm (
7
⁄8”) GB222
23.8mm (
15
⁄16”) GB238
27mm (1
1
⁄16”) GB27
28.6mm (1
3
⁄8”) GB286
30.2mm (1
3
⁄16”) GB302
31.8mm (1
1
⁄4”) GB318
33.3mm (1
5
⁄16”) GB333
METRIC JIG
Dia. Ref.
15.9mm GB159
22mm GB22
26mm GB26
28mm GB28
30mm GB30
32mm GB32
Dust shield
Dust spout
Adaptor
MANU-M&Tv2.2 8/7/10 10:51 Page 6