T10 & T11
-5-
ITEMS ENCLOSED
T10
1 x Parallel side-fence with micro adjuster
2 x Fence rods (pair)
1 x Collet
1
⁄
2
” (12.7mm) UK & Eire (Europe 12mm)
1 x Spanner (22mm A/F)
1 x Guide bush 30mm and fixing screws
1 x Inner plate and fixing screws
1 x Line-up pin 12mm/
1
⁄
2
”
1 x Dust extractor spout with fixing screws
1 x Dust extractor spout clip
1 x Instruction manual
1 x Guarantee registration card
T11
1 x Parallel side-fence with micro adjuster
1 x Fence rods (pair)
1 x Collet
1
⁄
2”
(12.7mm) UK & Eire (Europe 12mm)
1 x Spanner (22mm A/F)
1 x Guide bush 30mm and fixing screws
1 x Inner plate and fixing screws
1 x Line up pin 12mm/
1
⁄
2
”
1 x Dust extractor spout with fixing screws
1 x Dust extractor spout clip
1 x Fine height adjuster handle
1 x Instruction manual
1 x Guarantee registration card
MANUFACTURERS
DECLARATION
We declare under our sole responsibility that
this product is in conformity with the
following standards of standardised
documents:
EN 50144, EN 55014, EN 55014-2,
EN 61000-3-2, EN 61000-3-3 in accordance
with the directives 98/37/EC, 73/23/EEC,
89/336/EEC.
Level of sound pressure according to
86/188/EEC & 98/37/EC, measured
according to EN 50144:
Lpa (sound pressure) 93 dB(A)1
Lwa (acoustic power) 102 dB(A)2
Radio and TV suppression in compliance
with 76/889/EEC and 82/499/EEC
INFORMATION ON
NOISE/VIBRATION
The noise level when working
can exceed 85 dB(A).
Wear ear protection!
Weighted root mean square
acceleration value according to EN 50144:
< 2.5 m/s
2
Managing Director
Stephen Phillips
Trend Machinery & Cutting Tools Ltd.
T10E & T11E
To Next Page
Loading...
