Need help?Do you have a question about the TREND T10 and is the answer not in the manual?
Details voltage, power input, output, speed, and electrical ratings.
Defines the router's purpose for various routing tasks and materials.
Outlines essential safety rules for tool operation, environment, and personal protection.
Covers safety measures specifically for routing operations and equipment.
Provides critical safety advice for handling and using router cutters.
Details safety considerations when operating the router in a fixed or mounted configuration.
Offers advice for efficient and safe routing techniques and methods.
Emphasizes safety procedures and considerations for router cutter care and maintenance.
Instructions on how to operate the power switch and secure the tool.
Step-by-step guide for setting the router's cutting depth accurately.
Procedures for safely installing and uninstalling router bits.
Correct order for assembling the collet, nut, and cutter for secure fitting.
How to adjust the router's speed for optimal performance.
Information on locating and using threaded holes for accessory attachment.
Guidance on using the fine height adjuster for precise depth control.
Instructions for fitting the dust extraction spout to the T10 model.
Steps for installing the optional fine height adjuster on the T10.
Procedures for installing template guide bushes and the inner plate.
Instructions for fitting the dust extraction spout to the T11 model.
Detailed guide for installing the fine height adjuster on the T11.
Information on accessories for using the T11 with router tables.
Explains the correct direction for routing relative to cutter rotation.
Guidance on setting the appropriate feed rate for effective cutting.
Step-by-step instructions for safely lowering the router into the workpiece.
Specific method for edge moulding natural wood grain directions.
How to use the side fence for guiding the router along edges.
Using templates for repetitive or complex routing operations.
Advice on how to make accurate templates for routing.
Instructions for using the beam trammel accessory for cutting arcs.
Using cutters with bearings for edge profiling without guides.
Methods for freehand routing, lettering, and decorative work.
Using guides clamped to the workpiece for routing.
Recommended methods and precautions for cleaning the tool.
Procedure for replacing worn carbon brushes.
Guidance on lubricating moving parts and keeping vents clear.
General| Device Type | Wireless Router |
|---|---|
| Wireless Standards | IEEE 802.11n |
| Frequency Band | 2.4 GHz |
| Maximum Speed | 300 Mbps |
| Security | WPA, WPA2, WEP |
To Next Page
