Advanced Setting
System Log
This page support two methods to export system logs to specific destination by means of
syslog (UDP) and SMTP(TCP). The items you have to setup including:
IP Address for Sys log: Host IP of destination where sys log will be sent to. Check Enable
to enable this function.
E-mail Alert Enable: Check if you want to enable Email alert (send syslog via email).
SMTP Server IP and Port: Input the SMTP server IP and port, which are connected with
':'. If you do not specify port number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
Send E-mail alert to: The recipients who will receive these logs, you can assign more
than 1 recipient, using ';' or ',' to separate these email addresses.
E-mail Subject: The subject of email alert, this setting is optional.
Click on “Save” to store your settings or click “Undo” to give up the changes.
Dynamic DNS
To host your server on a changing IP address, you have to use dynamic domain name
To Next Page
Loading...
Need help?
General
