© 2018 Triacta Power Solutions LP All Rights Reserved
Figure 3: Triacta GATEWAY Internal view
Figure 2 shows the internal view of the Triacta GATEWAY .
Triacta GATEWAY Meter Head
The Meter Head unit supports the following:
x One to four measurement modules each supporting twelve inputs for 80mA CTs,
100mA CTs, 333mV CTs or pulse counters.
x Large front panel 4X20 LCD display for manual meter reading and diagnostics
x On-board Wifi for craft interface hotspot
x On-board 10/100BaseT Ethernet
x Two USB-2.0 ports for future use
x Dual processor architecture for enhanced system capability and flexibility
Triacta GATEWAY Meter Base
The Triacta GATEWAY Meter Base supports connection points for the following:
x One or two Voltage Reference Inputs
x One optional Auxiliary Control Voltage Input
x One to four self-shorting input modules supporting up to 12, 24, 36 or 48 wire pairs for
CT’s or pulse output devices.
x Optional future communication modules.
Triacta GATEWAY Voltage Module
The Voltage Module has two separate Sense Voltage inputs, an Auxiliary Control Voltage
input, and a control voltage jumper.
To Next Page
Loading...