© 2018 Triacta Power Solutions LP All Rights Reserved
Introduction
This document describes the Triacta GATEWAY system, including procedures to install and
start up the unit:
This documentation is intended for those responsible for installing the Triacta GATEWAY.
Installers must be qualified electricians with knowledge of local and national code
requirements. See “Safety Precautions” on page 7.
Scope
This Guide is for the mechanical and electrical installation of the Triacta GATEWAY.
Refer to the Triacta GATEWAY Configuration and Operations Guide for device configuration,
commissioning, and operation of the Triacta GATEWAY.
To Next Page
Loading...