© 2018 Triacta Power Solutions LP All Rights Reserved
Equipment servicing and access
The information in this section must be considered as a mandatory requirement, and must
be strictly adhered to when installing and operating Triacta GATEWAY.
Access to equipment
The equipment must be accessible to authorized personnel only. Equipment must be installed
in areas where access can be restricted.
Servicing the equipment
No preventive maintenance is required on any of the equipment. Visually inspect the
equipment yearly and ensure it is free of dust or other particles. If necessary, wipe with a
clean cloth.
Component servicing
Individual components are not user-serviceable, and must be returned to Triacta Power
Solutions for repair. If an equipment fault occurs, do not attempt to repair the faulty component.
All maintenance activities should be performed by qualified personnel only. Do not perform
any operating or maintenance procedures that are not described in the product
documentation.
Graphical symbols
Table 9 shows the graphical symbols that appear on the equipment.
Table 9: Graphical symbols that appear on equipment
Indicates the supply wire protective earth, also known as
chassis ground, for the primary ground
This symbol indicates a replaceable fuse.
To Next Page
Loading...