51
TriMax Operation
Information Item Description
Boiler Status
Displays the current operating state of the Prestige. This is the same as
the status line on the home screen.
Heating Call Displays if a central heating call is present.
DHW Call Displays if a domestic hot water call is present
Boiler Firing Rate Displays the current firing rate of the Prestige.
Flame Ionization Current Displays the current flame ionization current from the ignitor.
Boiler Setpoint Displays the current setpoint of the Prestige.
Boiler Supply Temperature Displays the current supply temperature of the Prestige.
Boiler Return Temperature Displays the current return temperature of the Prestige.
Boiler Flue Temperature Displays the current flue temperature of the Prestige.
Outdoor Temperature Displays the current outdoor temperature.
DHW Storage Temperature
Displays the current DHW storage temperature when Indirect Water
Heater Sensor PSRKIT22 is installed.
External Modulation Signal
Displays the current external modulation signal being received from an
external controller.
CH Ignitions
Displays the number of central heating ignitions since the unit was
installed. This counter increases in increments of twenty.
CH Runtime
Displays the number of hours the Prestige has run for a central heating
call since the unit was installed.
DHW Ignitions
Displays the number of domestic hot water ignitions since the unit was
installed. This counter increases in increments of twenty.
DHW Runtime
Displays the number of hours the Prestige has run for a domestic hot water
call since the unit was installed.
Information Items
To Next Page
Loading...
Need help?
General
