Triax TDX - Page 22

System Monitoring
22
Red
There is a problem with the connection to
the subunit.
No colour
No subunit is connected to the main unit.
Unit Link 2
Green –
constant
The subunit is connected to the main unit.
Red
There is a problem with the connection to
the subunit.
No colour
No subunit is connected to the main unit.
Sub Unit 2 in
multi-unit
installation
System
Status
Green –
constant
Power is on and the headend is operational.
Green – flashing
The headend is booting up.
Red
An error has been detected in the headend,
which must be investigated.
Tuner Status
Green –
constant
The input module tuners are locked.
Red
One or more Input module tuners are not
locked.
Unit Link 1
Green –
constant
The subunit is connected to the main unit.
Red
There is a problem with the connection to
the subunit.
No colour
No subunit is connected to the main unit.
Unit Link 2
Green –
constant
The subunit is connected to the main unit.
Red
There is a problem with the connection to
the subunit.
No colour
No subunit is connected to the main unit.