Managing Configuration Files
45
Managing configuration files
1. Select the System window.
2. Select the New button.
An empty configuration file is created and listed in the configuration list
area.
1. Select the System tab.
2. Select the configuration that is to be actively used on the
headend.
3. Press the Set active button.
1. Select the System tab.
2. Highlight the configuration file to be deleted.
3. Press the Delete button.
Headend configuration files can, if desired, be saved on the computer.
This simplifies the process of configuring additional headends that
contain the same modules.
A saved configuration file can also be used on headends that do not
contain exactly the same modules. It will, however, be necessary to
reconfigure/delete/add the modules that differ between the initial
headend and that being configured.
To Next Page
Loading...
