Headend Installation
8
Single headend installation
The headend can be mounted either on a system rack or directly onto
a wall.
1. Attach the mounting brackets to the headend with the supplied
screws.
At the front of a headend.
At the rear of a headend.
2. Attach the headend to the wall or onto a system rack.
1. Ensure that min. 10cm ventilation space is available on both
sides and the front of the headend.
2. Insert the key into the headend.
3. Open the door.
4. Lift the door off its hinges (optional).
5. Remove the top cover (optional).
To Next Page
Loading...
