triOS nanoFlu - Measurement Ranges and Limits of Detection

30 D01-060en202008 Manual nanoFlu
Use Calibration
Malfunction &
Maintenance
Commis-
sioning
Introduction
General
Information
FAQWarranty
Customer
Service
Contact
Keyword
Index
AccessoriesTechnical Data
Technical Data // nanoFlu
7.2 Measurement Ranges and Limits of Detection*
The following table provides an overview of the measurement ranges of various parameters and their limits of
detection:
*under laboratory conditions
Parameters Unit Measurement range Detection limit
Chl_a µg/L
0...200 µg/L
0...500 µg/L
0,2 µg/L
1 µg/L
blue µg/L
0...200 µg/L
0...500 µg/L
0,3 µg/L
3 µg/L
CDOM µg/L
0...200 µg/L 0,3 µg/L