triOS nanoFlu - 2 Introduction; Product Identification; Scope of Delivery

6 D01-060en202008 Manual nanoFlu
Use Calibration
Malfunction &
Maintenance
Commis-
sioning
General
Information
FAQTechnical Data Warranty
Customer
Service
Contact
Keyword
Index
AccessoriesIntroduction
Introduction // nanoFlu
2 Introduction
2.1 Product Identication
All TriOS Mess- und Datentechnik GmbH products have a label, which clearly shows the product designation.
There is also a rating plate on the sensor with the following information that you can use to uniquely identify
the product:
2.2 Scope of Delivery
The delivery contains the following components:
1. Sensor
2. Operating Instructions
3. Accessories (if applicable)
Keep the original packaging of the device in case it needs to be returned for maintenance or repairs.
Serial number
Product type
Power supply
Interface
In addition to the product bar code, the rating plate includes the TriOS Mess- und Datentechnik GmbH logo
and the quality label.
Please note that the specications given here are for illustration purposes only and may deviate depending on
the version of the product.
nanoFlu uorometers are low-priced, submersible miniaturized uorometers for highly precise and selective
measurement of CDOM (colored dissolved organic matter, yellow substances), chlorophyll A and phycocyanin
in cyanobacteria. Long-term stability of measurements is ensured by the combination of low power consump-
tion and innovative coating of the optical window, as an energy e󰀩cient and environmentally friendly antifouling
solution.
The devices can be used in diverse applications for the monitoring of sea and river waters, as well as in drinking
and wastewater treatment systems. Internal reference signals of the high performance LEDs used for uores-
cence excitation compensate ageing e󰀨ects and temperature inuences.