triOS nanoFlu - General Information

2 D01-060en202008 Manual nanoFlu
Use Calibration
Malfunction &
Maintenance
Commis-
sioning
Introduction FAQTechnical Data Warranty
Customer
Service
Contact
Keyword
Index
Accessories
General
Information
General Information // nanoFlu
1 General Information
1.1 Introduction
Welcome to TriOS.
We are glad that you have chosen to purchase our nanoFlu immersion sensor.
nanoFlu uorometers are online measuring instruments used to determine dyes and pigments (such as cyano-
bacteria, chlorophyll-A or CDOM) by measuring uorescence emission. The parameters emit light at a certain
wavelength when excited by a dened external light source.
Equipped with our innovative G2 interface with a web browser conguration, exible protocols and data outputs,
the nanoFlu possesses equipment attributes that are signicantly greater than the devices currently available
on the market.
In this manual, you will nd all the information you will need to commission the nanoFlu. Technical specications
as well as detection limits and the dimensions can be found in chapter 7.
Please note that the user is responsible for complying with local and national regulations on the installation of
electronic devices. Any damage caused by incorrect use or unprofessional installation will not be covered by
the warranty. All sensors and accessories supplied by TriOS Mess- und Datentechnik GmbH must be installed
and operated in accordance with the specications provided by TriOS Mess- und Datentechnik GmbH. All parts
were designed and tested in accordance with international standards on electronic instruments. The device
meets the requirements of the international standards on electromagnetic compatibility. Please use only original
TriOS accessories and cables to ensure smooth and professional use of the devices.
Read this manual thoroughly before using the device and retain it for future reference. Before commissioning
the sensor, please make sure that you have read and understood the following safety precautions. Always
make sure that the sensor is correctly operated. The safety precautions described on the following pages
should ensure the smooth and correct operation of the device and any additional associated devices and
should prevent injuries to yourself or other persons and damage to other equipment.
Copyright Notice
All content in this manual, i.e. texts, photographs and graphics, are protected by copyright. Unless expressly
stated otherwise, TriOS Mess- und Datentechnik GmbH is the owner of the copyright. Violations of this copy-
right will be punishable according to section 106 󰀨 of the German Copyright Act. The violator will be warned at
his own expense and must pay compensation.
Software Updates
This manual refers to software version 1.0.x. Updates include bug xes, new features and options. Devices with
older software versions may not have all functions described here.
If the translation is at all di󰀨erent from the original German text, the German ver-
sion is binding.
NOTICE