triOS nanoFlu - Disposal Information; Certificates and Approvals

5D01-060en202008 Manual nanoFlu
UseCalibration
Malfunction &
Maintenance
Commis-
sioning
IntroductionFAQ Technical DataWarranty
Customer
Service
Contact
Keyword
Index
Accessories
General
Information
nanoFlu // General Information
The sensor may only be used to measure the uorescence of aqueous uids, such as process wastewater,
municipal wastewater, and the surface/groundwater. The use of other media can damage the sensor. For the
use of the nanoFlu in other media than those specied in this manual, please contact the customer service of
TriOS Mess- und Datentechnik GmbH (support@trios.de).
According to current scientic knowledge, the device is safe to use when it is handled according to the instruc-
tions in this user manual.
1.6 Disposal Instructions
At the end of the device’s life or use, the device and its accessories can be returned to the manufacturer for
environmentally friendly disposal for a fee (see address below). The preceding professional decontamination
must be proven with a certicate. Please contact us before you send the device back to nd out more details.
Address of the manufacturer:
TriOS Mess- und Datentechnik GmbH
Bürgermeister-Brötje-Str. 25
D-26180 Rastede
Germany
Tel.: +49 (0) 4402 69670 - 0
Fax: +49 (0) 4402 69670 – 20
1.7 Certicates and Approvals
This product meets all the requirements of the harmonized European standards. It therefore meets the legal
requirements of the EU guidelines. TriOS Mess- und Datentechnik GmbH conrms the successful testing of the
product by a󰀩xing the CE marking (see annex).
Avoid touching the measuring window, since it can become scratched or dirty.
This means the functionality of the device can no longer be guaranteed.
NOTICE