Bar Mixer Shower
10
FITTING THE SHOWER
Offer the shower to the brackets, check that the
sealing washers are in place, and carefully tighten
the nuts.
Care must be taken not to damage the chrome
plated surface (g.8).
OPERATING THE SHOWER
FLOW CONTROL -
g.9
To start the mixer, rotate the on/off ow control
(right-hand side).
TEMPERATURE
CONTROL -
g.10
To adjust the water temperature, rotate the
temperature control (left-hand side).
To overcome the maximum temperature stop,
press the override button and rotate.
LEAK TESTING
Fit the hose to the outlet and direct it to waste
(g.11). Open the isolating valves to the shower
and check for leaks. Remedy any leaks found.
Fig.9
Fig.8
Fig.10
Fig.11
Override button