34
General Information
Left Handlebar Switches
1. Headlight dip switch
2. Direction indicator switch
3. Horn button
4. Fog light switch
Headlight Dip Switch
High or low beam can be selected with the
headlight dip switch. To select high beam,
push the switch forward. To select low beam,
push the switch rearwards. When the high
beam is turned on, the high beam indicator
light will illuminate.
Note:
• A lighting on/off switch is not fitted
to this model. The position light, rear
light and licence plate light all
function automatically when the
ignition is turned to the ON position.
• The headlight will only function
when the ignition switch is turned to
the ON position and the engine is
running.
An alternative to turn on the
headlight, without the engine
running, is to pull the clutch lever
then turn the ignition switch to the
ON position. The headlight will be
on and remain on when the clutch
lever is released.
The headlight will go off while
pressing the starter button until the
engine starts.
To Next Page
Loading...
Need help?
General
