43
General Information
To Install the Windscreen
To install the windscreen, stand astride the
front wheel and align the windscreen lower
mounting slots to the lower mountings on
the front forks.
Note:
• An audible click can be heard when
the windscreen upper mountings are
fully engaged.
Align the windscreen upper mounting slots
with their upper mountings on the front
forks. With a firm push, fully engage the
upper mountings.
Ensure both of the upper mounting latches
are fully engaged round the mountings.
To prevent detachment of the windscreen
during riding, after fitting always grasp the
windscreen and pull firmly upwards. If the
windscreen is not correctly secured it may
detach from the motorcycle. A loose or
detached windscreen could cause loss of
motorcycle control and an accident.
After fitting or removing the windscreen,
operate the motorcycle in a safe area free
from traffic to gain familiarity with any new
characteristics. Operation of the motorcycle
when not familiar with any new handling
characteristics may result in loss of
motorcycle control and an accident.
Never attempt to clean or adjust the
windscreen while riding the motorcycle.
Removal of the rider's hands from the
handlebars while riding the motorcycle will
diminish the ability of the rider to maintain
the control of the motorcycle. Attempting
to clean or adjust the windscreen while
riding the motorcycle may result in loss of
motorcycle control and an accident.
To Next Page
Loading...
Need help?
General
