59
How to Ride the Motorcycle
Fuel
Have sufficient fuel for the increased fuel
consumption that will result from high-speed
operation.
Engine Oil
Make certain that the engine oil level is
correct. Ensure that the correct grade and
type of oil is used when topping up.
Drive Belt
Make certain that the drive belt is correctly
adjusted. Inspect the belt for wear,
damage/cuts, frayed edges, or broken teeth.
Coolant
Check that the coolant level is at the upper
level line in the expansion tank (always check
the level with the engine cold).
Electrical Equipment
Make certain that the headlight, rear/brake
light, direction indicators, horn etc., all work
properly.
Miscellaneous
Visually check that all fixings are tight.
The exhaust system for this model is fitted
with a catalytic converter to help reduce
exhaust emission levels. The catalytic
converter can be permanently damaged if
the motorcycle is allowed to run out of fuel
or if the fuel level is allowed to get very
low. Always ensure you have adequate fuel
for your journey.
To Next Page
Loading...
Need help?
General
