29
General Information
Clock Adjustment
To reset the clock, select the clock display.
Then press and hold the scroll button for
4 seconds, the clock’s hour display will start
to flash; release the scroll button.
To reset the hour display, ensure the hour
display is still flashing then press the scroll
button to change the setting. Each individual
button press will change the setting by one
digit. If the button is held, the display will
continuously scroll through in single digit
increments.
When the correct hour display is shown,
release the scroll button for 4 seconds. The
minutes display will begin to flash. The
minutes display is adjusted in the same way
as for the hour display.
Once both hours and minutes are correctly
set, release the scroll button for 4 seconds
and the display will cease to flash.
Range to Empty
1. Range to empty
This is an indication of the predicted distance
that can be travelled on the remaining fuel in
the tank.
Do not attempt to adjust the clock with the
motorcycle in motion as this may lead to
loss of motorcycle control and an accident.
To Next Page
Loading...
Need help?
General
