Triumph TR7 - Check for Oil Leaks _. X X X X X; Check;Adjust All Driving Belts, Renew as Necessary. X X X

Check for Engine Oil leaks
Check/adjust all Driving Belts
Check/adjust all Driving Belts, Renew as Necessary
(1) Inspect all drive belts.
(2) Renew any
belt that is ellher:-
(a) worn or (b) damaged
(3) Check dnving belt tension using the followrng as a
guide:-
Alternator driver belt - 13 to 19 mm (t 10 t m).
Power steering pump drive belt - 19 to 25 mm (f to
1
m).
Air conditioning pump drive belt - 19 to 25 mm (f to
1 Inl.
Measured at the mid point of the longest belt run
between pulleys,
MAl NTENANCE AN D ADJ U STM ENTS
(4) Should adjustment be necessary:-
Slacken,
but do not remove. the appropriate Unit
mounting nuts/bolts.
Slacken. but do not remove. the Unit Pivot nuts/bolts,
Adjust the position of the Unit to achieve correct belt
tension.
RfHighlen the pivot and mounting nuts/bolts.
(5) To renew a drive belt. follow the procedure under
Instruction (4). noting that other drive belts may have to
be removed tor access,
41