Need help?Do you have a question about the Trolex XD1+ and is the answer not in the manual?
General| Category | Gas Detector |
|---|---|
| Output Signal | 4-20mA |
| Sensor Type | Infrared |
| Power Supply | DC |
| Certifications | ATEX, IECEx |
Details the intended applications and purpose of the XXD1+ personal monitor.
Specifies the operational boundaries and conditions for the XXD1+ to ensure performance.
Highlights essential safety warnings, including potential hazards and laser radiation precautions.
Provides specific safety instructions regarding laser radiation and compliance standards.
Identifies and describes the main physical components and features of the XXD1+.
Lists the European Union Directives and UK Regulations the XXD1+ complies with.
Details the information presented on the XXD1+ product label on the rear of the device.
Details the technical specifications of the XXD1+ device, including sensing parameters.
Provides the physical dimensions of the XXD1+ device in millimeters and inches.
Explains the mounting options available for the XXD1+, including standard and optional clips.
Outlines the factory default settings for the XXD1+ device and how to change them.
Explains the graphical interface, icons, and indicators used for warnings and status.
Details the sequences for powering the XXD1+ on, off, and performing self-tests.
Explains how to perform self-tests and handle accidental switch activation.
Covers battery status, power management, low-power shutdown, and calibration.
Details the 'Normal' mode for real-time monitoring and its power management features.
Describes 'In-cab', 'Data log', and 'Live readout' modes for specific monitoring tasks.
Explains STEL and TWA alarm indications, priority, and default thresholds.
Presents the calculations used for monitoring STEL and TWA threshold breaches.
Describes how to acknowledge triggered alarms and the conditions for alarm reset.
Covers charging procedures and the multiway data/charging dock.
Details BreatheLITE software usage, setup, and device configuration.
Explains data download, analysis, and firmware update procedures.
Details visual checks and cleaning procedures for the XXD1+ device.
Covers cleaning particulate apertures and performing compliance audit checks.
Explains audit results and provides guidance on preventative maintenance schedules.
Advises on operating the XXD1+ near atomised dust suppression systems.
Explains how the XXD1+ handles recoverable errors and alerts for fatal errors.
Lists and explains fault codes displayed by the XXD1+ for various error conditions.
Instructs on the proper disposal of the XXD1+ according to WEEE regulations.
Provides contact information for technical support services.
Offers a channel for users to provide suggestions or report errors in the publication.
To Next Page