Trolex XD1+ - 11.2 Operational Sequences

22 D1
+
PERSONAL DUST MONITOR
All icons will illuminate white.Power on
Self-test sequence
On initial power up, the D1
+
will perform a self-test sequence
indicated by a sequential blue flash
of each icon.
This is followed by a ‘pass’ indication
of flashing green icons and sounder
confirmation.
If the self-test fails or identifies any
faults during the routine, flashing red
icons will be indicated.
Power o
All icons will illuminate white
incrementally before the D1
+
powers down.
XD1+_User manual_P5650.1600_Rev A
11.2 Operational sequences
The following details the main operational sequences of the D1
+
.