9
Always observe the safety precautions detailed in this user manual. Personnel installing, operating
or maintaining the equipment are responsible for their personal safety and correct handling of the
equipment in accordance with all safety instructions detailed or those outlined in local guidelines.
The D1
+
has been designed to be as simple to install and commission as possible. Nevertheless,
installation in working environments can be challenging and correct set up is critical to the function
of the instrument.
It is important that you carefully read the entire product User Manual before using and installing the
D1
+
for the first time and keep it in a safe place for future reference.
Refer to the Certification and Conformity section of this user manual and to the relevant
certificates for any installation parameters and special conditions of safe use. The installation or
use of the D1
+
must only be carried out by competent personnel. Observe the national safety
regulations issued, for example, by the employers’ liability insurance association, social security
institutions, occupational safety and health authorities or other safety organisations.
The D1
+
is a personal safety device and it is the operator’s responsibility to respond accordingly
to any warnings, alarms or alerts in accordance with site regulations and instructions. Follow all
warnings and instructions marked on the instrument.
Retain these instructions in a safe and known place for future use.
5. SAFETY PROCEDURES
The D1
+
is rated via the Class 1 ‘Laser Safety Guideline’ under all conditions of normal use.
Class 1 laser products may contain laser systems of a higher class but there are adequate
engineering control measures to ensure that access to the beam is not permitted during normal
use.
5.1 Laser safety precautions
WARNING – Class 3B laser radiation: do not open the laser
housing when the laser is powered on as it may result in eye
damage from directly viewing the laser beam.
The D1
+
complies with:
• IEC 60825-1 2014
• 21 CFR-1040.10 and 1040.11
XD1+_User manual_P5650.1600_Rev A
To Next Page
Loading...