Trolex XD1+ - 14.3 Software and Configuration

37
XD1+_User manual_P5650.1600_Rev A
14.3 Trolex BreatheLITE software
BreatheLITE serves as the dashboard interface for the D1
+
and allows users to connect
single and multiple devices.
Connecting the D1
+
to the Trolex BreatheLITE software allows for easy device navigation,
set-up and custom threshold setting as required. BreatheLITE is also used to store, view
and analyse collected data from a single location and is an essential tool to support the
maintenance of the D1
+
.
Application information, details and a help section is available on download of the software.
The Trolex BreatheLITE software can be downloaded by following the supporting information
at www.trolex.com.
The D1
+
can be connected to the BreatheLITE software where users can setup the
following parameters:
• Device name
• Com port
• Operating mode
• Alarm PM size
• TWA period (minutes / hours)
14.4 Configuration
• TWA threshold (µg/m³)
• STEL period (minutes/hours)
• STEL thershold (µg/m³)
• Log rate (seconds)
• Particle density (g/ml)