BA 8010_3.0_EN (10/2016) 2 / 68
Trotec Laser GmbH
Linzer Strasse 156
A – 4600 Wels
AUSTRIA
Ph.: +43/7242/239-0
E-Mail: trotec@troteclaser.com
www.troteclaser.com
Trotec cannot be held responsible for any direct or indirect damages, which result from using or
working with the products electric circuits or software described herein. The apparatus must be used
only by trained and skilled personnel. Before use the manual should be read and followed carefully.
Furthermore Trotec reserves the right to change or alter any product described herein without prior
notice.
In case of failure, please check the device first according to section 6.1 Tips for Troubleshooting. If
unsuccessful, please note all data of the device (year of manufacture, software version, etc.) and
call us from a telephone next to the switched on device.
For queries or technical problems please contact your dealer or Trotec directly at the above address.
This documentation with all illustrations is intellectual property of Trotec Laser GmbH.
The entire documentation is given to the user for personal use only. This documentation must not
be reproduced or made available to others without our written permission. Any breach of law will be
prosecuted.
To Next Page
Loading...
Need help?
General
