Troxler 3440 Plus - Erase Projects

8–6
ERASE PROJECTS
To erase either a selected project file or all project files, press 〈4〉 at
the Projects menu shown on page
8–2. The gauge displays the
Erase menu:
 To erase a single project, press 〈1〉. If more than one project has
been created, the gauge displays:
Use the arrow keys to scroll through the project names
displayed on the first line. When the gauge displays the desired
project, press
〈ENTER/START〉. At the Are you sure?
prompt, press the
〈YES〉 key. The gauge erases the project and
returns to the Projects menu.
 To erase all projects, press 〈2〉 at the Erase menu. At the Are
You Sure? prompt, press the
〈YES〉 key. The gauge erases all
the projects and returns to the Projects menu.

  
  
   
  
  

 