Troxler 3440 Plus - Reviewing the Stat Test; Printing the Stat Test

5–6
The gauge displays the progress of the stat test (twenty 1-minute
counts). Upon completion of the counts, the gauge displays the
results of the density stat test, including an indication of whether the
test passed or failed:
Press 〈ENTER/START〉 to view the results of the moisture stat test.
Follow the prompts to scroll through the results.
REVIEWING THE STAT TEST
To review the results of the last stat test, press 〈2〉 at the Stat Test
menu shown on page
5–5. The gauge displays the results of the
density stat test as shown above. Press
〈ENTER/START〉 to view
the results of the moisture stat test. Follow the prompts to scroll
through the results.
PRINTING THE STAT TEST
To print the results of the last stat test to a serial printer or computer
via the gauge’s 9-pin serial port, press
〈3〉 at the Stat Test menu
shown on page
5–5. The gauge prompts the operator to connect the
printer to the gauge.
Connect a serial cable to the gauge’s serial port. Ensure that the
serial cable meets the pinout shown on page F–6. An optional serial
cable, PN 113128, is available from Troxler. Connect the serial
cable to the printer or computer serial port.
Press 〈ENTER/START〉. The gauge prints or uploads the stat test
data and returns to the Stat Test menu.
  
  
  
  