Troxler 3440 Plus - Page 106

8–8
At the Projects menu shown on page 8–2, press 〈5〉. The gauge
request the output format as shown:
The 32 Column Report option is formatted for a standard printer
width. This format is recommended when outputting the data to a
printer. The Spreadsheet option is sent in a comma-delimited
format, which can then be imported easily into a spreadsheet
program, such as Microsoft Excel. Figure 8–1 defines the
information contained in each column of the spreadsheet.
Press 〈1〉 or 〈2〉 to select the desired output format. The gauge
displays:
From this menu, the gauge can print (or upload) either a single
project or all projects.
 To output a single project, press 〈1〉. The gauge displays:
Use the arrow keys to scroll through the project names
displayed on the first line. When the gauge displays the desired
project, press
〈ENTER/START〉.
 To output the data from all projects, press 〈2〉.
The gauge prints (or uploads) the selected project(s) and returns to
the Projects menu shown on page 8–2
. Press the 〈ESC〉 key to
return to the Ready screen.

  
  
   

   
 
   
  
  

 